8642 Error Codes

Error Codes
   The following might appear on the display and/or information panel: 
Error Code FRU/Action 
000095XX
(System complex failure)
1. Memory Card 
2. Bridge Card 
3. Processor Card 
4. System Board 
000113XX 
(First memory card is missing or not operational.)
1.Memory Card 
000114XX 1. Any Adapter 
2. System Board 
00016400 (Memory size changed) 1. Memory Card 
00021700 (Multi-bit ECC error) 1. Memory Card 
00024000, 000297XX 1. Memory Card 
009503XX 
009505XX 
009506XX
1. System Board 
2. Processor Card 
3. Bridge Card 
4. Memory Card 
01290050 01290051 
01290052 01290053 
01290054 01290055 
01290056
1. System Board 
2. Bridge Card 
3. Processor Card 
4. Memory Card 
5. Any PCI Card 
01296000
(Processor not supported)
1. Replace the Processor Card 
0129910X  (Adapter in slot X has an invalid serial number) 1. Replace adapter in indicated slot
013010XX
(I2C failed to respond)
1. System Board 
01300AXX (Slot LED problem) 1. System Board 
01300BXX
(Display panel problem)
1. Display Panel 
2. Power Switch Panel 
3. System Board 
0210XXXX 
(Internal bus size unknown)

0210XXX1
(External bus size unknown)

1. SCSI Hard Disk Drive 
2. SCSI Adapter or system board SCSI . 
3. SCSI Cable
4. SCSI ID Switch (on some models) 
026109XX (Display problem) 1. Display 
026111XX
(Video adapter problem)
1. Video Adapter 
02790XXX  02791XXX 02792XXX  02793XXX 
027906XX  027907XX
 (Ethernet adapterPOST error)1. Check power and reseat adapter. 2. Ethernet PeerMaster ServerAdapter 
02799XXX
(Communications to PeerMaster failed or the adapter failed.)
1. Run Setup and verify PeerMaster Server configuration. 
2. Ethernet PeerMaster Adapter 
0279XXXX 1. FWSR /A (FRU No. 06H3059) 
2. System Board 
3. Signal Pass Through Card (if installed) 
028309XX (Display problem)  1. Display 
028310XX
(System board video problem) 
1. System Board
028331XX
(System board video) 
1. System Board

 
 
 

9595 Main Page