; ; Version: 1.00 ; ; (C) Copyright International Business Machines Corporation 1993 ; All Rights Reserved ; AdapterId 08FA8h AdapterName "IBM EtherStreamer MC32 Adapter" NumBytes 4 FixedResources POS[0]=1xxxxxxxb POS[2]=x1xx0xx1b Begin NoDMA NamedItem Prompt "Adapter Media Type Selection" Choice "Autosense" POS[1]=x1xxxxxxb Choice "UTP" POS[1]=00xxxxxxb POS[2]=1xxxxxxxb Choice "COAX" POS[1]=10xxxxxxb POS[2]=0xxxxxxxb Choice "AUI" POS[1]=00xxxxxxb POS[2]=0xxxxxxxb Help "This option allows you to select which cable type is connecting the adapter card to the network. The choices are Autosense, in which the adapter determines the media, Attachment Unit Interface (AUI), Unshielded Twisted Pair (UTP or 10BASET), or Coax (10BASE2). The assignment for the adapter media type can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys." NamedItem Prompt "System Interrupt Level" Choice "Interrupt 3" POS[1]=xx01xxxxb Int 03h Choice "Interrupt 2" POS[1]=xx00xxxxb Int 02h Choice "Interrupt 10" POS[1]=xx10xxxxb Int 0Ah Choice "Interrupt 11" POS[1]=xx11xxxxb Int 0Bh Help "This option allows you to select the interrupt level that the adapter will use to interrupt the system unit. The preferred interrupt level is 3, but the adapter can operate on any of the four levels if necessary. The assignment for this interrupt level can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and must be changed." NamedItem Prompt "Micro Channel I/O Address" Choice "1C00-1CFF" POS[0]=x000111xb IO 01C00h-01CFFh Choice "2000-20FF" POS[0]=x001000xb IO 02000h-020FFh Choice "2400-24FF" POS[0]=x001001xb IO 02400h-024FFh Choice "2800-28FF" POS[0]=x001010xb IO 02800h-028FFh Choice "2C00-2CFF" POS[0]=x001011xb IO 02C00h-02CFFh Choice "3000-30FF" POS[0]=x001100xb IO 03000h-030FFh Choice "3400-34FF" POS[0]=x001101xb IO 03400h-034FFh Choice "3800-38FF" POS[0]=x001110xb IO 03800h-038FFh Choice "3C00-3CFF" POS[0]=x001111xb IO 03C00h-03CFFh Choice "4000-40FF" POS[0]=x010000xb IO 04000h-040FFh Choice "4400-44FF" POS[0]=x010001xb IO 04400h-044FFh Choice "4800-48FF" POS[0]=x010010xb IO 04800h-048FFh Choice "4C00-4CFF" POS[0]=x010011xb IO 04C00h-04CFFh Choice "5000-50FF" POS[0]=x010100xb IO 05000h-050FFh Choice "5400-54FF" POS[0]=x010101xb IO 05400h-054FFh Choice "5800-58FF" POS[0]=x010110xb IO 05800h-058FFh Choice "5C00-5CFF" POS[0]=x010111xb IO 05C00h-05CFFh Choice "6000-60FF" POS[0]=x011000xb IO 06000h-060FFh Choice "6400-64FF" POS[0]=x011001xb IO 06400h-064FFh Choice "6800-68FF" POS[0]=x011010xb IO 06800h-068FFh Choice "6C00-6CFF" POS[0]=x011011xb IO 06C00h-06CFFh Choice "7000-70FF" POS[0]=x011100xb IO 07000h-070FFh Choice "7400-74FF" POS[0]=x011101xb IO 07400h-074FFh Choice "7800-78FF" POS[0]=x011110xb IO 07800h-078FFh Choice "7C00-7CFF" POS[0]=x011111xb IO 07C00h-07CFFh Choice "8000-80FF" POS[0]=x100000xb IO 08000h-080FFh Choice "8400-84FF" POS[0]=x100001xb IO 08400h-084FFh Choice "8800-88FF" POS[0]=x100010xb IO 08800h-088FFh Choice "8C00-8CFF" POS[0]=x100011xb IO 08C00h-08CFFh Choice "9000-90FF" POS[0]=x100100xb IO 09000h-090FFh Choice "9400-94FF" POS[0]=x100101xb IO 09400h-094FFh Choice "9800-98FF" POS[0]=x100110xb IO 09800h-098FFh Choice "9C00-9CFF" POS[0]=x100111xb IO 09C00h-09CFFh Choice "A000-A0FF" POS[0]=x101000xb IO 0A000h-0A0FFh Choice "A400-A4FF" POS[0]=x101001xb IO 0A400h-0A4FFh Choice "A800-A8FF" POS[0]=x101010xb IO 0A800h-0A8FFh Choice "AC00-ACFF" POS[0]=x101011xb IO 0AC00h-0ACFFh Choice "FC00-FCFF" POS[0]=x111111xb IO 0FC00h-0FCFFh HELP "This option allows you to select the micro channel I/O address range of the adapter. For micro channel I/O cycles, this Ethernet Network adapter is selected when the micro channel I/O address is within a 256 byte region. If more than one adapter is used in your computer, each adapter must be assigned a separate I/O address range. The assignment for the I/O address range can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=PREVIOUS and the F6=NEXT keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and the I/O address range must be changed. If a conflict continues to exist, you may need to change the assignments for other options that are in your computer to resolve the conflict." NamedItem Prompt "Streaming Data Select" Choice "Enabled" POS[3]=xx1xxxxxb Choice "Disabled" POS[3]=xx0xxxxxb Help "This Ethernet Network Adapter can operate with or without Data Streaming. For best performance, select . This selection can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys." NamedItem Prompt "Fairness" Choice "Fairness ON " POS[3]=xxx0xxxxb Choice "Fairness OFF" POS[3]=xxx1xxxxb Help "Bus Arbitration Fairness controls whether the adapter will share the bus equitably with other devices or retain control of the bus as needed. Under normal circumstances, select . The assignment for fairness can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys." NamedItem Prompt "Arbitration Level" Choice "Level 1" POS[3]=xxxx0001b arb 01h Choice "Level 2" POS[3]=xxxx0010b arb 02h Choice "Level 3" POS[3]=xxxx0011b arb 03h ; Choice "Level 4" POS[3]=xxxx0100b arb 04h Choice "Level 5" POS[3]=xxxx0101b arb 05h Choice "Level 6" POS[3]=xxxx0110b arb 06h Choice "Level 7" POS[3]=xxxx0111b arb 07h Choice "Level 8" POS[3]=xxxx1000b arb 08h Choice "Level 9" POS[3]=xxxx1001b arb 09h Choice "Level A" POS[3]=xxxx1010b arb 0Ah Choice "Level B" POS[3]=xxxx1011b arb 0Bh Choice "Level C" POS[3]=xxxx1100b arb 0Ch Choice "Level D" POS[3]=xxxx1101b arb 0Dh Choice "Level E" POS[3]=xxxx1110b arb 0Eh Help "This Ethernet Network adapter can operate on one of thirteen arbitration levels: 1, 2, 3 or 5 thru E. If more than one adapter is used in your computer, each adapter must be assigned a separate arbitration level. Assignment for the arbitration level can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and the arbitration level must be changed. If a conflict continues to exist, you may need to change the assignments for other adapters or options that are in your computer to resolve the conflict." NamedItem Prompt "Parity Enable/Monitor Feedback" Choice "Parity OFF/Monitor OFF" pos[2]=xxxxx00xb Choice "Parity ON /Monitor OFF" pos[2]=xxxxx10xb Choice "Parity OFF/Monitor ON " pos[2]=xxxxx01xb Choice "Parity ON /Monitor ON " pos[2]=xxxxx11xb Help "Micro Channel Parity Enable/Monitor Slave devices feedback signal: This Ethernet Network adapter provides the capability of generating and checking data and address parity. In addition, this adapter also provides the capability of monitoring slave device's Selected Feedback Return Exception signals during DMA operations. These assignments can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys."