Intel FlashWorks utility FLRESTOR v1.68 09/11/97 ----------------------------------------------------------------- WARNING: FlashVirusProtect does NOT work with DOS partitions greater than 2040 megabytes!! DO NOT attempt to use FlashVirusProtect on DOS (FAT)partitions greater than 2040 megabytes or on Non-DOS partitions. Data Corruption and loss of data on your hard drive may result. | FLRESTOR re-enables or reloads the FlashStart program stored in the flash memory on an Intel Flash adapter. The 1.68 version will work with any of the FlashWorks versions. To reload the FlashStart program, the flash image file EPRO.FLS for the EtherExpress(TM) PRO/10 and PRO/10+, EEFLASH.FLS for the EtherExpress16, FL32.FLS for the Flash32, TPRO.FLS for the TokenExpress(TM) PRO, or E100.FLS for the EtherExpress PRO/100 must be in the same directory as FLRESTOR. - To re-enable FlashStart type: FLRESTOR - To reload FlastStart type: FLRESTOR /ERASE. If you have FlashVirusProtect loaded on your flash chip, you will need to use the /ERASE option. - If you have multiple flash adapters in your PC, review the FLRESTOR options by typing FLRESTOR /?. FLRESTOR does not reprogram the EEPROM on the Intel Flash adapter. All EEPROM settings for the adapter (i.e. I/O address, IRQ, connector type, etc.) will remain intact.