;      Adapter Description File for the ARTIST 1000 MC Series
;      ARTIST Graphics
;      March 1, 1993
;      Version 1.1

AdapterId 080C5H
AdapterName "ARTIST 1000 MC Series"
NumBytes 3

NamedItem
Prompt "PC I/O Address"

choice "03EXh & 07EXh" pos[0]=X111110Xb io 03E0h-03EFh 07E0h-07EFh 
choice "02CXh & 06CXh" pos[0]=X101100Xb io 02C0h-02CFh 06C0h-06CFh 
choice "02DXh & 06DXh" pos[0]=X101101Xb io 02D0h-02DFh 06D0h-06DFh 
choice "02EXh & 06EXh" pos[0]=X101110Xb io 02E0h-02EFh 06E0h-06EFh 

Help
"This assignment need only be changed if it is in conflict
with another installed adapter.  The default I/O address range 
is 03E0h and 07E0h.  Conflicting assignments are marked with an 
asterisk and must be changed for proper adapter operation.

Use the F5=Previous and the F6=Next keys to change your selection. "



NamedItem
Prompt "PC Memory Address - Below 1MB"

  choice "CC00-CFFF" pos[1]=110011X1b mem 0CC000h-0CFFFFh
  choice "C800-CBFF" pos[1]=110010X1b mem 0C8000h-0CBFFFh
  choice "D000-D3FF" pos[1]=110100X1b mem 0D0000h-0D3FFFh
  choice "D400-D7FF" pos[1]=110101X1b mem 0D4000h-0D7FFFh
  choice "D800-DBFF" pos[1]=110110X1b mem 0D8000h-0DBFFFh
  choice "DC00-DFFF" pos[1]=110111X1b mem 0DC000h-0DFFFFh
  choice "Disabled"  pos[1]=000000X0b 

Help
"The default PC memory address is 0xCC00. This 16 Kbyte block in PC 
memory maps into two 8 Kbyte windows in the GPX memory space.  These 
8 Kbyte windows can each be mapped to start at any 8 Kbyte boundary 
in the GPX memory space.  By using the system configuration utility 
to configure memory usage the user is assured of a non-conflicting 
selection.  If the PC memory address is configured as disabled the 
software you are using with the ARTIST 1000 MC Series graphic controller
will use the default.  Conflicting assignments are marked with an 
asterisk and must be changed for proper adapter operation.

Use the F5=Previous and the F6=Next keys to change your selection."


NamedItem
Prompt "Data Bus Sizing"

choice "32 Bits" pos[1]=XXXXXX1Xb
choice "16 Bits" pos[1]=XXXXXX0Xb

Help
"The ARTIST 1000 MC Series graphic controller can be configured to 
operate in a 16 bit Micro Channel card slot or a 32 bit Micro Channel
card slot.

Use the F5=Previous and the F6=Next keys to change your selection."


NamedItem
Prompt "Interrupt Level"

choice "Disabled"  pos[2]=XXXX000Xb
choice "IRQ 5"     pos[2]=XXXX001Xb int 5
choice "IRQ 7"     pos[2]=XXXX010Xb int 7
choice "IRQ 10"    pos[2]=XXXX011Xb int 10
choice "IRQ 11"    pos[2]=XXXX100Xb int 11

Help
"The ARTIST 1000 MC Series graphic controller can be configured to use 
Interrupt 5, 7, 10, 11 or interrupts may be disabled.  The default is 
interrupts disabled.

Use the F5=Previous and the F6=Next keys to change your selection."


NamedItem
Prompt "PC Memory Address - Above 1MB"

choice "Disabled"    pos[2]=000XXXX0b
choice "2MB - 4MB"   pos[2]=001XXXX1b mem 0200000h-03FFFFFh
choice "4MB - 6MB"   pos[2]=010XXXX1b mem 0400000h-05FFFFFh
choice "6MB - 8MB"   pos[2]=011XXXX1b mem 0600000h-07FFFFFh
choice "8MB - 10MB"  pos[2]=100XXXX1b mem 0800000h-09FFFFFh
choice "10MB - 12MB" pos[2]=101XXXX1b mem 0A00000h-0BFFFFFh
choice "12MB - 14MB" pos[2]=110XXXX1b mem 0C00000h-0DFFFFFh
choice "14MB - 16MB" pos[2]=111XXXX1b mem 0E00000h-0FFFFFFh

Help
"A PC memory address above 1MB should only be used for UNIX systems.
The default is decoding above 1MB is disabled.

Use the F5=Previous and the F6=Next keys to change your selection."