Radius SVGA MultiView MC

@80B7.ADF - Radius SVGA MultiView 
Radius SVGA Utilities disk courtesy of Mike Armstrong
Radius SVGA Drivers Disk (Win3.1/ACAD/Lotus)

SVGA MultiView MC
ADF Sections



SVGA MultiView MC
J2 HDD15 port
J4 VESA Media Connector
JP1 Three pin header (ROM Bank ?)
SW1 Monitor switch
U5 SC11484CV RAMDAC
U6 Headland HT209/D
U18,19 BIOS
U20 Radius 297-0580-A
U27 14.318 xtal
U51-58 Toshiba TC524256BJ-80

JP1- Possibly chooses between two BIOS ROM banks???
SW1 It says-
   2 ON - FULL PAGE DISPLAY
   2 OFF - MULTISYNC MONITOR
       I _assume_ this might mean BOTH on or off.
U18,19 BOTH are marked SVGA Multiview MC, V2.02 256K, -0050-02 A
U5 Sierra Semiconductor Mark2 SC11484 (15bit, 6/8bit DAC, overlay)



ADF Sections 080B7h "Radius SVGA MultiView"

FastWrite Setting
   The FastWrite cache is used to reduce memory wait states to virtually zero on all memory writes.
        <"FastWrite Enabled">, FastWrite Disabled

Pure Mode Setting
   Pure Mode is used to emulate a pure IBM VGA with no extensions.  To enable access to Radius extensions, Pure Mode must be disabled.
        <"Extensions Enabled">, Extensions Disabled
 
 

9595 Main Page