IBM Wireless LAN Adapter
Wireless LAN Kit Using the Wireless Lan under OS/2
e2sa2000.boo Wireless LAN Entry
e2sb5001.boo Wireless LAN Entry 8227 Access
Point User's Guide
e2sd3001.boo Wireless LAN Entry Network
New Features for IBM Wireless LAN
IBM Wireless LAN
IBM Wireless LAN Adapter Files
These Installation Diskettes are the most current version
of this product. These images support the Wireless LAN Adapter in three
hardware configurations—ISA, MCA, or PCMCIA —Configured as a Wireless Base
Station, or as a Wireless Requester.
Wireless LAN (Advanced) - ISA/MCA Adapter, with External
Transceiver, and PCMCIA Card, with External Transceiver - is 1Mbps and
only has DOS & OS/2 driver support. WLLANn.EXE files are for these.
wllan1.exe IBM RF Wireless LAN Diskette
1 of 6 - Utility
wllan2.exe IBM RF Wireless LAN Diskette
2 of 6 - Netware Base
wllan3.exe IBM RF Wireless LAN Diskette
3 of 6 - DOS/Windows
wllan4.exe IBM RF Wireless LAN Diskette
4 of 6 - OS/2 1 of 3
wllan5.exe IBM RF Wireless LAN Diskette
5 of 6 - OS/2 2 of 3
wllan6.exe IBM RF Wireless LAN Diskette
6 of 6 - OS/2 3of 3 (ADF and DGS)
|DS1 LED for ??
F1 PTC resistor
J2 ISA edgecard
J3 Radio port (DB9)
SW1 Address switch for ISA
U7 25H29410 RIPL
U16 25H09410 ucode
Y1 20.0000 MHz osc
P601 15 pin micro centronics
U504 Motorola 86L01
Marked as 84D09747T01 Issue O 709UYA2PM Motorola 1994
AdapterID DFF4 IBM
Wireless LAN Adapter
RIPL Address Range
There are 8 possible 16K blocks of memory that can be
assigned for accessing the EEPROM area of the Wireless LAN Adapter. The
RIPL address range selected must not be assigned for use by any other adapter
or option and cannot be the same as the RAM address for other adapters.
<"Disable RIPL">, C000-C3FF
(C000-C3FF), C400-C7FF (C400-C7FF), C800-CBFF (C800-CBFF), CC00-CFFF (CC00-CFFF),
D000-D3FF (D000-D3FF), D400-D7FF (D400-D7FF), D800-DBFF (D800-DBFF), DC00-DFFF
The prioritized interrupt request line on which the Wireless
LAN Adapter will interrupt the system. This adapter can operate on one
of four interrupt levels: 3, 9, 10, or 15. (Ed.
Remember this is an ISA/MCA card- see below!)
The interrupt level selected must
not be assigned for use by any other adapter or option. A conflict will
not be indicated by an asterisk (*) and the detection must be done by the
operator by checking the other adapters interrupt assignment
15, 3, 9
DMA Arbitration Level
This selects the priority level of the adapter when requesting
the bus for a DMA data transfer. The DMA channels 0-7 are immediately associated
with the respective arbitration levels.
<"Level 3">, 0,
1, 2, 4, 5, 6, 7
BUS ARBITRATION FAIRNESS: This controls whether
or not the adapter will give up participating in the next bus arbitration
when it has been using it exclusively.
I/O Base Address
There are 63 possible I/O base addresses that can be assigned
for accessing the communication registers of the IBM Wireless LAN Adapter.
The preferred I/O base address for the adapter is <0400>. Each assignment
reserves the following 255 contiguous port addresses for this adapter.
<"0400" (IO 00400h - 004FFh)>,
and 63 others...
9595 Main Page