Olicom OC-2335
@6447.adf  Fast Ethernet MCA 10/100 
OC2335 Fast Ethernet MCA 10/100 

GTO2335.pdf   Guide to Operations for Ethernet MCA 10/100 Adapter (OC-2335)
AN-995.pdf   DP83800 Software Programmers Guide
DP83840A.pdf   DP83840A 10/100 Mb/s Ethernet Physical Layer
Linux Driver Alfred Arnold bangs another Linux driver out again 
Olicom 2335 Page at Olicom 

Current Disk Release
Setup Disk Version V01.0 (924.2 KB) 04-14-1999
Drivers Version V01.0 (303.3 KB) 04-14-1999
Diagnostics Version V01.0 (280.2 KB) 04-14-1999
Flash RPL Version V1.1 (38 KB) 04-14-1999

Software Updates
Windows 95 Driver Upgrade Utility (1.1 MB) 06-08-1999
   Readme file
Windows NT 3.51 and Windows 95 NDIS 3.00 miniport Version 1.10 (60.5 KB) 04-14-1999 
Windows 98 NDIS 5 Miniport Driver v1.06 (26 KB)  07-14-1999 
Novell 4.x LAN Driver Version 1.05 (74.6 KB) 04-14-1999 
Novell 3.x LAN Driver Version 1.07 (121.8 KB) 04-14-1999 
NDIS 2.0 Version 1.06 (59.7 KB) 04-14-1999 
ODI Version 1.07 (30.2 KB) 04-14-1999 
NDIS 2.0 Version 1.06 (32.9 KB) 04-14-1999 
ODI Version 1.04 (29 KB) 04-14-1999 
AIW Version 4.14 (0.94 MB) 09-17-1999 
Diagnostics Version 1.21 (229 KB) 04-14-1999 

Alfred Looks at One (Chip Stuff)
ADF Sections

OC2335 Fast Ethernet MCA 10/100

  There are NO silkscreened component IDs on the PCB. NONE whatsoever.

OC-2729 Boot PROM Kit for RPL 

Further OC-2335 Chip Stuff
Alfred Arnold said:
   Turns out that the Olicom uses the really cheesy National DP83800 controller chip.  Has an ISA style interface, no DMA, just plain PIO data transfer.  Tx and Rx buffers are integrated, but 3K Tx buffer and 5K Rx buffer is a joke for a 100Mbit card...now I know why our hardware guys here opted for the SMSC and added 128K buffer space to it (and that was just an ISDN access router).
   Given that Olicom didn't add any 'magic glue' between the NIC and the Microchannel bus, the data sheet should be sufficient for writing a driver and we don't need Olicom's help.  Though the sheet was not available on National's site any more, our hardware guys still had a copy of the PDF
file.  This PDF file has a footer that says 'National Semiconductor Confidental - Do Not Copy'...whatever that means for us...

AdapterID 6447 Olicom Ethernet MCA 10/100 Adapter

I/O Address Location
   <Choice "0 =  200h"  (IO 0200-021F)>, 1 = 240 (0240-025F), 2 = 280 (0280-029F), 3 = 2C0 (02C0-02DF), 4 = 300 (0300-031F), 5 = 340 (0340-035F), 6 = 380 (0380-039F), 7 = 3C0 (03C0-03DF)

RPL Address location
   There are 8 possible 16K blocks of PC memory that can be assigned for accessing the RPL area of the ethernet network adapter.
  <"RPL Disabled">, C000-C3FF (C000-C3FF), C400-C7FF (C400-C7FF),  C800-CBFF (C800-CBFF), CC00-CFFF (CC00-CFFFF), D0000-D3FF (D000-D3FF), D400-D7FF (D400-D7FF), D800-DBFF (D800-DBFF), DC00-DFFF (DC00-DFFF)

Interrupt Level
  <"Interrupt 2">, 3, 4, 5, 10, 11, 12, 15

9595 Main Page