SCSIWorks version 1.3 (Disk1) For Trantor products. Includes DOS drivers
SCSIWorks version 1.3 (Disk2) For Trantor products. Includes DOS drivers
ASPI Managers for Trantor products Drivers for DOS and Windows 3.x
Upgrade for Trantor ASPI Managers Upgrades existing files to EZ-SCSI 3.1 versions
TRAN_NT.EXE  WinNT 3.1/3.5 drivers for T160/260, T338, T348, and T358
TRAN_OS2.EXE  OS/2 v2.x drivers for T128/228, T130b, T160/260, T338, T348, and T358    OS/2 v3.0 WARP BETA will require the updated OS/2 drivers for Trantor SCSI adapters available from IBM to properly register with the new WARP Resource Manager.
TRAN_NLM.EXE   Novell drivers for CDROM on NetWare 3.12/4.0x for the Trantor T130b, T160/260, and T358 MiniSCSI EPP. These drivers do NOT support hard disks, but will allow you to use a CDROM drive with a Novell v3.12 or v4.0x server and a Trantor SCSI adapter.

T-260 Installation Guide 

T-260 SCSI Host Adapter
ADF Sections

The T-260 model uses the Apple DB25 SCSI port.
Data Transfer Rate Up to 3.2 MBytes/sec sustained rate on the Micro Channel bus and up to 2.0 MBytes/sec on the SCSI bus

I/O Port
    The Trantor T260 SCSI Host Adapter is I/O mapped. The port addresses used by the card must not be used by any other cards in the computer.
     <"360h - 36fh">, 350h - 35fh, 340h - 34fh, 330h - 33fh, 260h - 26fh, 250h - 25fh, 240h - 24fh, 230h - 23fh

ROM Address
   A Read Only Memory (ROM) is an option on the Trantor T260 SCSI Host Adapter. If you wish to use this option you must select the 8k range of memory which will be used by the ROM. You may also disable the ROM with this selection.
    <"ROM Disabled">, c8000h - c9fffh, ca000h - cbfffh"  pos [1] = xx010xxxb  mem 0ca000h-0cbfffh, ce000h - cffffh, d0000h - d1fffh, d4000h - d5fffh, d8000h - d9fffh, dc000h - ddfffh

Interrupt Channel
   The Trantor T260 SCSI Host Adapter supports interrupts or they may be disabled..
   <"None">, 3, 5, 7, 10, 12, 14, 15