|
Possible Complex Death! PODV5V133/interposer P60 Failure Possible Cache Controller Incompatibility 95A Planar into 8595 case Peltier Junctions P90 to 200 / 233 2MB Cache in SCSI w/Cache P90 to P180 w/o soldering N Complex Socket 3 Attempt
P90 to 180 Original photos to come soon. 95A Planar in 8595 Case Well, we know that the 95 series uses the same PS, drives, case, and on and on. But if you want to stick the dual serial/parallel planar of a 95A into an 8595 case, it just won't fit. If you have a spare 8595 case, you can extend the bottom of the port opening from 6.4" to 9.07" long and the 95A planar will fit. Do not alter the top of the port opening.... Unmount the existing planar before starting. Reciprocating saws do not care if they cut through phenolic as well as steel... Make sure that all metal filings or dust are vacuumed out of the case. The 95A planar should fit the existing screw points. I finally whacked an 8595 case for a 95A planar with a hacksaw and frustration. Don't try to create a flange at the bottom side of the new cutout area- The web that's left is so damn thin you will bend it while trying to get the flange shaped. Just cut an extension to the existing slot downward.
|