@8DF6.ADF - IBM Image-I Adapter/A 

Drivers
ia32v211.exe    Image/A & Image-i OS/2 Drvr (2.1x-BETA) 
iadsp211.exe     Image/a & Image-i Dsp. Sprt. (required) 
ia16v210.exe    Image/a & Image-i OS/2 16bit drivers 
iaopt211.exe     Image/a & Image-i Opt Dsk(inc new 76/77 ) 
iawin210.exe     Image/a & Image-i Windows 3.x drivers 
iados210.exe     Image/a & Image-i DOS AI&AutoCAD drvrs 

193-220 IBM PS/2 IMAGE-I ADAPTER/A

Image-I Adapter/A
Adapter Parts
Image-I Specs
13W3 Pinout
ADF Sections

       A Printer/Scanner Option (#1632) is available with the adapter allowing the direct attachment of the following devices: 
o   IBM 3812 Printer Model 002 with Image Feature (#4050) or IBM 4216 Personal Pageprinter Model 020 
o   IBM 3117 Scanner with extension unit (PN 6456808) or IBM 3118 Scanner or Bell & Howell 2115I (1) Scanner or equivalent 
       IBM PS/2 Image Adapter/A enables both a scanner and a printer to be attached at one time via this optional printer/scanner daughter card. Use of the Printer/Scanner Option does not require an extra system unit slot. 

Version
   Version is not actually an option but just informs you which version of the Image Adapter/A Windows 3.1 Display Driver that you have.

Resolution
   X and Y dimensions (in pixels) of the display mode required. See Table 1,2,3,4 for a list of valid modes. If an invalid mode is specified, the driver reverts to its default (the highest resolution available on the display attached).

BitsPerPixel
   Bits per pixel should be specified as 1, 2, 4, 8 or 16. Note that some of the higher bits per pixel are invalid in some of the Image Adapter/A memory configurations. If an invalid bits per pixel is specified, the driver reverts to its default (the highest bits per pixel available (up to 8) at the selected resolution).

PaletteManager
   At 1, 2 and 4 bits per pixel, the palette is fixed to 2, 4, and 16 colors respectively. The Palette Manager options do not apply and are ignored. Dithering is enabled to approximate colours that are not in the palette.

At 16 bits per pixel, the adapter is in direct color mode and there is no palette, the Palette Manager options do not apply and are ignored. Dithering is disabled.

At 8 bits per pixel, there are three PaletteManager options,

YES     Palette Manager enabled
   At 8 bits per pixel (256 color mode) only 20 system colors are assigned (10 at the bottom and 10 at the top). The remaining 236 colors are available for the Palette Manager to assign to applications that request them. For applications that do not use the Palette Manager, dithering is enabled to approximate colors that are not in the system palette. This is the default setting at 8 bits per pixel.

NO      Palette Manager disabled
   At 8 bits per pixel the palette is fixed to a particular set of colors. Dithering is disabled, the driver selects the nearest color available from the fixed palette.

GRAY    Gray scale palette
   At 8 bits per pixel there are 256 shades of gray (even on a color display). In all other aspects it is like the fixed palette. This option may be useful for certain applications. This is NOT usually the best palette to select for monochrome displays, unless the application is specifically designed for gray level displays.

If you need to switch this option on or off see "Switching the Palette Manager On and Off".

MemoryUsage
   This is reserved for special applications designed to run only on the Image Adapter/A. Unless you are using one of these special applications this option should always be set to Maximum.

DualScreen
   This only applies when you have two displays attached to your system. For example, a VGA display attached to the standard VGA port of the system unit and a high resolution display attached to the Image Adapter/A.

NO      The display attached to the Image Adapter/A will always be used as the main display for running Windows applications and full screen VGA applications. When running full screen VGA
applications both displays will be showing the same results.  This is the default setting.

YES     During a Windows session, a display attached to the Image Adapter/A will be used only for running Windows apps. When running full screen VGA apps (from within the Windows environment) only the VGA display will display the VGA application. Windows applications running in the background on the Windows display will continue to be updated.

If you have only one display (attached to the Image Adapter/A) you should select NO for this option.

VirtualScreen
   X and Y dimensions(in pixels) of the virtual display mode required. The x possible value is 1024,2048, 4096 and y possible value is 1024,2048,3072,4096. See Table 5,6,7 for a list of valid modes. Virtual screen is not supported with only 1MB card. If invalid value is specified, virtual screen is disabled. If you want to disable virtual screen, specify "VirtualScreen=No".

Display Modes
   Display resolutions and bits per pixel available for the various display and memory configurations. The numbers represent the bits per pixel. A blank box means the resolution is not supported.

Image Adapter/A (3 MB)Display Modes
               8513        8514        8506      8508        6091
640x480  ³ 1,2,4,8,16 ³ 1,2,4,8,16 ³          ³ 1,2,4,8  ³ 1,2,4,8,16 ³
1024x768 ³            ³ 1,2,4,8,16 ³          ³ 1,2,4,8  ³ 1,2,4,8    ³
864x1200 ³            ³            ³ 1,2,4,8  ³          ³            ³
1280x1024³            ³            ³          ³          ³ 1,2,4,8    ³
1360x1024³            ³            ³          ³ 1,2,4,8  ³            ³
1600x1200³            ³            ³          ³ 1,2,4    ³            ³

8513 column also refers to 8503 and 8512, and
8514 column also refers to 8507, 8515 and 8604
 

Direct Color Mode (16 bits per pixel)
  Some apps do not cope correctly with 16 bpp, a common symptom is that the application will think that its running on a b/w device and display as gray shades. Many of these apps run correctly if the BitsPerPixel option is set to 15. The driver still runs at 16bpp but it informs apps that there are 32,767 colours available instead of the correct value for direct colour devices which is -1.

The display ID override should be placed after the DEVICE=IADOSRFS.SYS line in your CONFIG.SYS. For example to override the display ID to 8 for a color display the line would look like:-
        DEVICE = C:\IBMIAA\IADOSRFS.SYS /DisplayID=8C

Table 9 lists the different ID's that should be used for the various possible modes. Note that you still need to specify the correct resolution in the WIN.INI file.

Table 9. Display ID Numbers
               Color    Mono
640x480   NI    1        2
1024x768  IL    5        6
1024x768  NI    21C      21M
864x1200  IL    10C      10M
1280x1024 NI    11C      11M
1360x1024 IL    21C      21M
1360x1024 NI    8C       8M
1600x1200 IL    8C       8M
 

Note:- IL refers to interlaced displays and NI refers to non-interlaced displays.

9504 Monochrome Monitor (2)
6091-016 Color Display
6091-19i Color Display
1091 Color Display
9517 Color Display.

 The Image-I Adapter/A is available in 3MB only, is ISO enabled, supports only ISO refresh rates and coexists with VGA on planar, XGA/XGA-2 chipset on planar,  XGA/XGA-2  Adapter/A card 
The Image-I Adapter/A can be installed in any 386, -SX, -SLC, 486SX, 486 or higher systems . 

   The Image-I Adapter/A can not be installed in the Model P70 386 (8573), .does not support the Image Adapter/A Printer/Scanner Option, and only one IBM PS/2 Image-I Adapter/A can be installed in a system unit.
       VGA data display can only be achieved if the Image-I Adapter/A is installed in the AVE slot.  Image-I Adapter/A may not be installed in slots with the matched memory extension.

    The display attached to the Image Adapter can show VGA graphics only if the adapter is installed in the AVEC slot. Ideally, the Image Adapter should be installed in the AVEC slot unless this slot is already in use (e.g. with an 8514/A Adapter) 

Various Cable P/ N 

Display Type	Cable MKT-P/N	Cable Description
6091-016/19i	49G2717	6091-I Cable Assembly (SIMM connector to 5BNC)
9504	NA	No special cable needed
9517	49G2718	IBM Connector Converter Cable
1091-051	09G3589	IBM 1091 Cable Assembly
9527	95G9906	IBM SIMM Cable
9521	95G9907	IBM SIMM Cable

 6019-019 Display Cable
   This cable is required if the Image-I Adapter/A is supporting a 6019-019.
The following table shows pin assignments for the 6091-019 Video Cable, P/N 58F2902. 
+------------------------------------------------------------------------+
¦ Connector P1 (15-pin  ¦ Label Designation      ¦ BNC Connector         ¦
¦ D-type)               ¦                        ¦                       ¦
+-----------------------+------------------------+-----------------------¦
¦ 1                     ¦ R                      ¦ Red Coax              ¦
+-----------------------+------------------------+-----------------------¦
¦ 2                     ¦ G                      ¦ Green Coax            ¦
+-----------------------+------------------------+-----------------------¦
¦ 3                     ¦ B                      ¦ Blue Coax             ¦
+-----------------------+------------------------+-----------------------¦
¦ 5                     ¦                        ¦ Red Coax Shield       ¦
+-----------------------+------------------------+-----------------------¦
¦ 7                     ¦                        ¦ Green Coax Shield     ¦
+-----------------------+------------------------+-----------------------¦
¦ 8                     ¦                        ¦ Blue Coax Shield      ¦
+-----------------------+------------------------+-----------------------¦
¦ 10                    ¦                        ¦ H, V, Shield          ¦
+-----------------------+------------------------+-----------------------¦
¦ 13                    ¦ H                      ¦ H Coax                ¦
+-----------------------+------------------------+-----------------------¦
¦ 14                    ¦ V                      ¦ V coax                ¦
+------------------------------------------------------------------------+

Image-I Adapter/A SIM-Video Connector 
 

DMA Arbitration Level
   Under normal circumstances, select 5, this is an arbitary decision!
          <"Level 5">, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0, 1, 2, 3, 4

Fairness On/Off
   Whether the adapter releases control of the bus when it has been using it exclusively
        <"On">, Off

Adapter I/O Addressing
    <"I/O Addresses 1D00-1D7F">,  2D00-2D7F, 3D00-3D7F, 4D00-4D7F

Adapter Memory Location
   Memory location adapter uses for the BIOS ROM, and RAM window
       <"Segment C000" (C000-C1FF)>, C200 (C200-C3FF), C400 (C400-C5FF), C600 (C600-C7FF), C800 (C800-C9FF), CA00 (CA00-CBFF), CC00 (CC00-CDFF), CE00 (CE00-CFFF), D000 (D000-D1FF), D200 (D200-D3FF), D400 (D400-D5FF), D600 (D600-D7FF), D800 (D800-D9FF), DA00 (DA00-DBFF), DC00 (DC00-DDFF), DE00 (DE00-DFFF)

Extended Memory Window
   Some applications may require an Extended Memory Window into Image Adapter/A RAM to appear high in the system address space.
       <"Disabled">, 1 Meg at Address E00000 (e000-eFFF), D00000 (d000-dFFF), C00000 (c000-cFFF), B00000 (b000-bFFF), A00000 (a000-aFFF), 900000 (9000-9FFF), 800000 (8000-8FFF), 700000 (7000-7FFF), 600000 (6000-6FFF), 500000 (5000-05FFF), 400000 (4000-4FFF), 300000 (3000-3FFF), 200000 (2000-2FFF), 100000 (1000-1FFF), 2 Meg at Address D00000 (d000-eFFF), C00000 (c000-dFFF), B00000 (b000-cFFF), A00000 (a000-bFFF), 900000 (9000-aFFF), 800000 (8000-9FFF), 700000 (7000-8FFF), 600000 (6000-7FFF), 500000 (5000-6FFF), 400000 (4000-5FFF), 300000 (3000-4FFF), 200000 (2000-3FFF), 100000 (1000-2FFF)

Interrupt Level
   The Interrupt level is fixed at 2.
       <"Interrupt 2">