Artist XJS Lite MC (5090)
Also called Artist 1000 MC
@80C5.adf   Artist 1000 MC (5090)

xjsdisk1.zip  ARTIST XJS Drivers Version 1.12 (5/93) Disk 1
xjsdisk2.zip  ARTIST XJS Drivers Version 1.12 (5/93) Disk 2

ADF Sections



Artist Winsprint (5090)
JP1 Video Out 
JP2 Jumper for? 
JP3 Jumper for? 
R2 Bourns 3323 Potentiometer or BCD? 
U1 TI TMS34020GBL-32 
U6 32.000000 MHz Osc
U7 Artist 1-GA 105J 
U28-U35 TI TMS44C251-1SD 
U36 72 pin SIMM socket 
U42 108.000 MHz Osc 
U43 TI TLC34075-110FN 
U46-U53 TI TMS44C251-1SD

AdapterId 080C5H ARTIST 1000 MC Series  Version 1.1

PC I/O Address
     <03EXh & 07EXh>, 02CXh & 06CXh, 02DXh & 06DXh, 02EXh & 06EXh 

PC Memory Address - Below 1MB
   The default PC memory address is 0xCC00. This 16 Kbyte block in PC  memory maps into two 8 Kbyte windows in the GPX memory space.  These 8 Kbyte windows can each be mapped to start at any 8 Kbyte boundary in the GPX memory space.  By using the system configuration utility 
to configure memory usage the user is assured of a non-conflicting selection.  If the PC memory address is configured as disabled the software you are using with the ARTIST 1000 MC Series graphic controller will use the default. 
     <CC00-CFFF>, C800-CBFF, D000-D3FF, D400-D7FF, D800-DBFF, DC00-DFFF, Disabled 

Data Bus Sizing
   The 1000 MC Series can operate in a 16 bit or a 32 bit Micro Channel card slot. 
     <32 Bits>, 16 Bits 

Interrupt Level
     The 1000 MC Series can use Interrupt 5, 7, 10, 11 or interrupts may be disabled 
     <Disabled>, IRQ 5, IRQ 7, IRQ 10, IRQ 11 

PC Memory Address - Above 1MB
     A PC memory address above 1MB should only be used for UNIX systems. The default is that decoding above 1MB is disabled 
     <Disabled>, 2MB - 4MB, 4 - 6, 6 - 8, 8 - 10, 10 - 12, 12 - 14, 14 - 16

9595 Main Page